Industrial Door Components - High Quality Door Hardware

BB4* - Bearing Blocks - Steel - 4" Tube

BB4* - Bearing Blocks - Steel - 4" Tube

BB4* - Bearing Blocks - Steel - 4" Tube with 101.6mm Ø Please Note: Steel Blocks can be manufactured to your own specification. specifications listed below are options available. If you do not see what you want, contact the office on 01282 615239 or sales@ Technical Details: ...

View More
BB5* - Bearing Blocks - Steel - 5" Tube

BB5* - Bearing Blocks - Steel - 5" Tube

BB5* - Bearing Blocks - Steel - 5" Tube with 127mm Ø Please Note: Steel Blocks can be manufactured to your own specification. specifications listed below are options available. If you do not see what you want, contact the office on 01282 615239 or sales@ Technical Details: ...

View More
BB55* - Bearing Blocks - Steel - 5 ½” Tube

BB55* - Bearing Blocks - Steel - 5 ½” Tube

BB55* - Bearing Blocks - Steel - 5 ½” Tube 139.7mm Ø Please Note: Steel Blocks can be manufactured to your own specification. specifications listed below are options available. If you do not see what you want, contact the office on 01282 615239 or sales@ Technical Details: ...

View More
BB6* - Bearing Blocks - Steel - 6” Tube

BB6* - Bearing Blocks - Steel - 6” Tube

BB6* - Bearing Blocks - Steel - 6” Tube 169.2mm Ø Please Note: Steel Blocks can be manufactured to your own specification. specifications listed below are options available. If you do not see what you want, contact the office on 01282 615239 or sales@ Technical Details: ...

View More
BB8* - Bearing Blocks - Steel - 8” Tube

BB8* - Bearing Blocks - Steel - 8” Tube

BB8* - Bearing Blocks - Steel - 8” Tube 219mm Ø Technical Details: Material: Bright Mild, Black Mild, EN3, EN8, EN24T Machined Faced: One side, Both Sides, Not Faced either side Machined Outside Ø: From 3" Ø - 8" Ø Tube and all wall sizes. Machined Bore: To suit all Shaft sizes, and R...

View More
BF3001 - Flange Bearing 3 Hole Type 20mm

BF3001 - Flange Bearing 3 Hole Type 20mm

BF3001 - Flange Bearing 3 Hole Type 20mm - SLFT204 Technical Details: Zinc Plated Steel Outer Pre-Punched 3 holes Sealed Bearing Product Codes: BF3001 Flange Bearing 3 Hole Type 20mm - SLFT204 ...

View More
BFF* - 4 Hole Flange Bearings

BFF* - 4 Hole Flange Bearings

BFF* - 4 Hole Flange Bearings Technical Details: Cast Body. Grease Nipple Sealed Roller Bearing Manufactured to BS Standards Product List: BFF001 Flange Bearing 4 Hole Type 1 inch - UCF 205-16 BFF002 Flange Bearing 4 Hole Type 30mm - UCF 206 BFF003 Flange Bearing 4 Hole...

View More
BFT* - 2 Hole Flange Bearing

BFT* - 2 Hole Flange Bearing

BFT* - 2 Hole Flange Bearing Technical Details: Cast Body Grease nipple Sealed Bearing Manufactured to British Standards Product Codes: BFF006 Flange Bearing 2 Hole Type 1 inch - UCFL 205-16 BFT001 Flange Bearing 2 Hole Type 20mm - UCFL 204 BFT002 Flange Bearing 2 Hole ...

View More
BN00* - Needle Bearing

BN00* - Needle Bearing

BN00* - Needle Bearing Technical Details: Hardened Body Chrome Finish Sealed Bearing Manufactured to British Standards Product Codes: BN003 - NEEDLE BEARING - 5/8" BORE - B1012 BN001 - NEEDLE BEARING - 3/8" x 9/16" x 5/8" LONG - CAGED TYPE BN002 - NE...

View More
BP001 - Pedestal Bearing - 1" Shaft, 2 Hole

BP001 - Pedestal Bearing - 1" Shaft, 2 Hole

BP001 - Pedestal Bearing - 1" Shaft, 2 Hole Technical Details: Cast Body Grease nipple Sealed Bearing Manufactured to British Standards Product Codes: BP001 - Pedestal Bearing - 1" Shaft, 2 Hole ...

View More
DE4* - Entex Torsion Spring - Shutters using 4" Barrels

DE4* - Entex Torsion Spring - Shutters using 4" Barrels

DE4* - Entex Torsion Spring - Shutters using 4" Barrels Roller Shutters with: Push Up Barrels Geared Barrels Chain Operated Barrels Sectional Doors, Garage Doors, High Speed Doors, Dock Levellers, Automated Gates. For information of spring selection, please contact the office on...

View More
DE44* - Entex Torsion Spring - Shutters using 89mm Deprat Barrels

DE44* - Entex Torsion Spring - Shutters using 89mm Deprat Barrels

DE44* - Entex Torsion Spring - Shutters using 89mm Deprat Barrels Roller Shutters with: Push Up Barrels For information of spring selection, please contact the office on 01282 615239 or email: sales@ Please note: Some Springs are Handed with the suffix L or R d...

View More
DS4* - Torsion Spring - Shutters using 4" Barrels

DS4* - Torsion Spring - Shutters using 4" Barrels

DS4* - Torsion Spring - Shutters using 4" Barrels to suit Roller Shutters with: Push Up Barrels Geared Barrels Chain Operated Barrels Sectional Doors, Garage Doors, High Speed Doors, Dock Levellers, Automated Gates. For information of spring selection, please contact the office ...

View More
DS5* - Torsion Spring - Shutters using 5" & 5 ½”  Barrels

DS5* - Torsion Spring - Shutters using 5" & 5 ½” Barrels

DS5* - Torsion Spring - Shutters using 5" & 5 ½”  Barrels ranging from 127mm Ø to 139.6mm Ø If replacing a spring, please ensure you measure the inside and outside diameter of the spring, the number of turns and the overall length. Roller Shutters with: Push Up Barrels Ge...

View More
DS6* - Torsion Spring - Shutters with 6" Barrel

DS6* - Torsion Spring - Shutters with 6" Barrel

For Springs to suit 6" Tube, please contact the office on 01282 615239 or email; sales@...

View More
ELB026 - Footmount Bracket To Suit Direct Drive & Flange Mounted Motors

ELB026 - Footmount Bracket To Suit Direct Drive & Flange Mounted Motors

ELB026 - Footmount Bracket To Suit Direct Drive & Flange Mounted Motors Plate Details: Pre-Drilled and Slotted for fixing to End plates Manufactured from 8mm Mild Steel Plate & Folded Self-Colour. (Can be supplied Primed / PPC Finish. P.O.A.) Dimensions 8mm Thick Plat...

View More
ELB033 - Top Hat Bracket To Suit Flange Mounted Motors

ELB033 - Top Hat Bracket To Suit Flange Mounted Motors

ELB033 - Top Hat Bracket To Suit Flange Mounted Motors Plate Details: Pre-Drilled and Slotted for fixing to End plates Manufactured from 8mm Mild Steel Plate & Folded Self-Colour. (Can be supplied Primed / PPC Finish. P.O.A.) Dimensions 6mm Thick Plate 200mm L x 240mm W...

View More
ELB037 - Footmount Bracket To Suit NICE Direct Drive Motors

ELB037 - Footmount Bracket To Suit NICE Direct Drive Motors

ELB037 - Footmount Bracket To Suit NICE Direct Drive Motors Plate Details: Pre-Drilled and Slotted for fixing to End plates Manufactured from 8mm Mild Steel Plate & Folded Self-Colour. (Can be supplied Primed / PPC Finish. P.O.A.) Dimensions 8mm Thick Plate Drilled 4no ...

View More
ELB047 - Safety Brake Footmount Bracket To Suit NB3000, NB4000

ELB047 - Safety Brake Footmount Bracket To Suit NB3000, NB4000

ELB047 Safety Brake Footmount Bracket To Suit NB3000, NB4000 Pre-Drilled to accept either NB3000 30mm Ø Hollow Shaft or NB4000 40mm Ø Hollow shaft Inertia Safety Brakes. Also pre-drilled for fixing to the End Plates Manufactured from Mild Steel Angle ...

View More
ELB047 - Safety Brake Spacer Plate to Suit NB1700 'Z' Brake

ELB047 - Safety Brake Spacer Plate to Suit NB1700 'Z' Brake

ELB047 - Safety Brake Spacer Plate to Suit NB1700 'Z' Brake Pre-Drilled to accept NB1700 Centre Piece Also pre-drilled for fixing to the End Plates Manufactured from Mild Steel Sheet Dimensions: 130mm W x 125mm D 5mm Thick Mild Steel 4no Holes suit 6mm Screw 85mm & 130mm...

View More
ELB059 - Fixing Plate - Steel - Top Hat Style with Tear Drop Holes for NT59 Tube Motors

ELB059 - Fixing Plate - Steel - Top Hat Style with Tear Drop Holes for NT59 Tube Motors

ELB059 - Fixing Plate - Steel - Top Hat with Tear Drop Holes for NT59 Tube Motors Technical Details: Mild Steel Tear Drop Holes for Fixing Screws Suits NT59 Tubular Motors S Series & M Series. Supplied with full set Zinc Plated Fixing Screws Enables quick change o...

View More
ELF039A - End Plate To Suit Direct Drive & Flange Mounted Motors with 30mm Shaft

ELF039A - End Plate To Suit Direct Drive & Flange Mounted Motors with 30mm Shaft

ELF039A - End Plate To Suit Direct Drive & Flange Mounted Motors with 30mm Shaft Plate Details: Pre-Drilled for fixing to Angles Slotted for 30mm Flange Bearing and 30mm Motor Shaft Manufactured from 8mm Mild Steel Plate Self-Colour. (Can be supplied Primed / PPC Finish. P.O.A.) ...

View More
ELF040 - End Plate To Suit Direct Drive & Flange Mounted Motors with 40mm Shaft

ELF040 - End Plate To Suit Direct Drive & Flange Mounted Motors with 40mm Shaft

ELF040 - End Plate To Suit Direct Drive & Flange Mounted Motors with 40mm Shaft Plate Details: Pre-Drilled for fixing to Angles Slotted for 40mm Flange Bearing and 40mm Ø Motor Shaft Pre-Drilled for Foot Mount to suit either Left or Right Hand Installation (Not Handed) M...

View More
ELF073 - End Plate Fitted with Support Cup and Drilled to suit Single Reduction Gearing

ELF073 - End Plate Fitted with Support Cup and Drilled to suit Single Reduction Gearing

ELF073 - End Plate Fitted with Support Cup and Drilled to suit Single Reduction Gearing Plate Details: Fitted with NV027A Steel Support Block with 20mm Slot for Shaft Support Cup Welded Standard Right Handed Fix but can be supplied for L/H fix Manufactured from 5mm Mild Stee...

View More
ELF074 - End Plate Fitted with Support Cup and Drilled to suit Single Reduction Gearing Dummy End

ELF074 - End Plate Fitted with Support Cup and Drilled to suit Single Reduction Gearing Dummy End

ELF074 - End Plate Fitted with Support Cup and Drilled to suit Single Reduction Gearing Dummy End Plate Details: Fitted with NV027A Steel Support Block with 20mm Slot for Shaft Support Cup Welded Standard Right Handed Fix but can be supplied for L/H fix Manufactured from 5mm Mild Stee...

View More
ELF100 - End Plate To Suit Direct Drive & Flange Mounted Motors with 55mm Shaft

ELF100 - End Plate To Suit Direct Drive & Flange Mounted Motors with 55mm Shaft

ELF100 - End Plate To Suit Direct Drive & Flange Mounted Motors with 55mm Shaft Plate Details: Pre-Drilled for fixing to Angles Slotted for 55mm Flange Bearing and 55mm Ø Motor Shaft Pre-Drilled for Foot Mount to suit either Left or Right Hand Installation (Not Handed) M...

View More
GBS001 - Drive Gear - Steel - 58T x 5dp 20mm Wide

GBS001 - Drive Gear - Steel - 58T x 5dp 20mm Wide

GBS001 - Drive Gear - Steel - 58T x 5 DP 20mm Wide Technical Details: Material: Bright Mild Steel Manufactured: To BS 436 Machined: Faced Machined: Bored (See Product List for sizes) Machined: Gearcut (See Product List for Pitch & Tooth Thickness) Machined: Keyway (See Product...

View More
GBS003 - Drive Gear - Steel - 58T x 5dp 1" Wide

GBS003 - Drive Gear - Steel - 58T x 5dp 1" Wide

GBS003 - Drive Gear - Steel - 58T x 5 DP 1" Wide Technical Details: Material: Bright Mild Steel Manufactured: To BS 436 Machined: Faced Machined: Bored (See Product List for sizes) Machined: Gearcut (See Product List for Pitch & Tooth Thickness) Machined: Keyway (See Product L...

View More
NB1800P - Safety Brake Spacer Plate to Suit NB1800 'X' Brake

NB1800P - Safety Brake Spacer Plate to Suit NB1800 'X' Brake

NB1800P - Safety Brake Spacer Plate to Suit NB1800 'X' Brake Pre-Drilled to accept NB1800 Centre Piece Also pre-drilled for fixing to the End Plates Manufactured from Zinc Plated Mild Steel Sheet Dimensions: 125mm W x 125mm D 3mm Thick Mild Steel 4no Holes suit 6mm Screw L...

View More
NS1001 - Adjustable Hinge - 2.5mm X 70mm X 155mm

NS1001 - Adjustable Hinge - 2.5mm X 70mm X 155mm

NS1001 Adjustable Hinge 2.5mm x 70mm x 155mm For use with 11mm dia stem rollers Bright Galvanised Steel Adjustable setting ...

View More
NS1002 - Hinge - 2.5mm x 65mm

NS1002 - Hinge - 2.5mm x 65mm

NS1002 Hinge 2.5mm x 65mm Bright Galvanised Steel ...

View More
NS2001 - Residential Top Bracket - 62mm X 60mm X 95mm

NS2001 - Residential Top Bracket - 62mm X 60mm X 95mm

NS2001 Residential Top Bracket - 62mm x 60mm x 95mm​ Bright galvanised steel For use with 11mm dia steel rollers Fully Adjustable ...

View More
NS2002 - Commercial Bottom Bracket - For 2" Track - Per Pair

NS2002 - Commercial Bottom Bracket - For 2" Track - Per Pair

NS2002 Commercial Bottom Bracket - Bright Galvanised Steel Milford pin cable attachment For use with 2" track and 11mm dia steel rollers ...

View More
NS2003 - Safety Bottom Bracket - For 2" Track - Per Pair

NS2003 - Safety Bottom Bracket - For 2" Track - Per Pair

NS2003 2" Safety Bottom Bracket - Bright Galvanised Steel Heavy duty design For use with 2" track and 11mm dia steel rollers ...

View More
NS3001 - Spring Fittings -  3 ³⁄₄″  Universal Thread - Pairs

NS3001 - Spring Fittings - 3 ³⁄₄″ Universal Thread - Pairs

NS3001 - Spring Fittings -  3 ³⁄₄″  Universal Thread - Pairs Universal thread for use in either LH or RH wound springs. Pair includes 1 winding and 1 stationary Hardened cup point set screws installed For use on 1" tube or solid shaft - min. 1/2 turn on set screws ...

View More
NS3002 - Spring Fittings - 6" Single Thread - Set of 4

NS3002 - Spring Fittings - 6" Single Thread - Set of 4

Spring Fittings 6" Single Thread - Set of 4 Single thread for LH & RH wound springs Maximum wire size - 4375" dia Set includes 2 winding and 2 stationary Hardened cup point set screws installed with heads For use on solid shaft - max 30 ft lbs set screws torque 1" bore with 1/4" ...

View More
NS4001 - Roller - 2-7-11-N for 2" Track - 7" Stem with White Nylon Wheel

NS4001 - Roller - 2-7-11-N for 2" Track - 7" Stem with White Nylon Wheel

NS4001 Roller 2-7-11-N for 2" Track 2" 11 ball nylon tyre roller with zinc plated stem 7" stem white nylon Bulged shoulder Rating 75 lb load at 15,000 12' door cycle ...

View More
NS4002 - Roller - 2-4-11-N for 2" Track - 4" Stem with White Nylon Wheel

NS4002 - Roller - 2-4-11-N for 2" Track - 4" Stem with White Nylon Wheel

NS4002 Roller 2-4-11-N for 2" Track 2" 11 ball nylon tyre roller with zinc plated stem 4" stem white nylon Bulged shoulder Rating 75 lb load at 15,000 12' door cycle ...

View More
NS500* - Solid Steel Shaft - 1" Dia with 1/4" Keyway

NS500* - Solid Steel Shaft - 1" Dia with 1/4" Keyway

Bright galvanised steel. NS5001 Solid Steel Shaft 1" Dia x 6 Mtr Long with 1/4" Keyway NS5002 Solid Steel Shaft 1" Dia x 3 Mtr Long with 1/4" Keyway ...

View More
NS5003* - Hollow Steel Shaft -  1" Dia with 1/4" Keyway

NS5003* - Hollow Steel Shaft - 1" Dia with 1/4" Keyway

Bright Galvanised Steel NS5003 Tubulat Steel Shaft 1" Dia x 6 mtr Long with 1/4" Keyway NS5004 Tubular Steel Shaft 1" Dia x 3 mtr Long with 1/4" Keyway ...

View More
NS5011 - Shaft Coupler - 1" bore with 1/4" Keyway - Malleable Cast Iron

NS5011 - Shaft Coupler - 1" bore with 1/4" Keyway - Malleable Cast Iron

NS5011 Shaft Coupler - 1" Bore with 1/4" Keyway Malleable iron for high strength and shock resistance loading Coupler halves assembled - fully adjustable Square head set screws installed ...

View More
NS5021 - Pusher Spring - 15" (6" Compression) Bracket with Mounting Slots - Per Pair

NS5021 - Pusher Spring - 15" (6" Compression) Bracket with Mounting Slots - Per Pair

NS5021 Pusher Spring 15" - Pair Bracket with mounting slots Zinc plated steel Total length 15" 6" Compression 2" dia rubber bumper ...

View More
NS5031 - Cable

NS5031 - Cable

NS5031 Cable - 7 x 7 3mm (Metre) NS5032 Cable - 7 x 7 4mm (Metre) NS5033 Cable - 7 x 7 5mm (Metre) NS3034 Cable - 7 x 19 3mm (Metre) NS5035 Cable - 7 x 19 4mm (Metre) NS5036 Cable - 7 x 19 5mm (Metre) ...

View More
NS5041 - Aluminium Oval Cable Sleeve

NS5041 - Aluminium Oval Cable Sleeve

NS5041 Aluminium Oval Cable Sleeve 3mm NS5042 Aluminium Oval Cable Sleeve 4mm NS5043 Aluminium Oval Cable Sleeve 5mm ...

View More
NS5051 - Aluminium Oval Cable Sleeve Double

NS5051 - Aluminium Oval Cable Sleeve Double

NS5051 Aluminium Oval Cable Sleeve Double 3mm NS5052 Aluminium Oval Cable Sleeve Double 4mm NS5053 Aluminium Oval Cable Sleeve Double 5mm ...

View More
NS5061 - Aluminium Round Cable Sleeve

NS5061 - Aluminium Round Cable Sleeve

NS5061 Aluminium Round Cable Sleeve 3mm NS5062 Aluminium Round Cable Sleeve 4mm NS5063 Aluminium Round Cable Sleeve 5mm ...

View More
NS507- 1/2 Vertical Track

NS507- 1/2 Vertical Track

NS5071 Vertical Track 1.5mm x 6 Mtr NS5072 Vertical Track 2.0mm x 6 Mtr Note priced per metre...

View More
NS5081 - Chain Hoist Complete - 4:1 Ratio 1" Bore Shaft

NS5081 - Chain Hoist Complete - 4:1 Ratio 1" Bore Shaft

NS5081 Chain Hoist complete 4:1 Ratio Shaft Mounted 1" Bore Includes Sprocket 1" Bore 22" Roller Chain 26' Hand Chain 1 Chain Keeper 2 Shaft Collars 1 Wall Stabiliser Bracket c/w Fastenings ...

View More
NS5091 - PVC Spring Filler

NS5091 - PVC Spring Filler

NS5091 PVC Spring Filler - 120mm O/D x 27mm Bore x 3 Mtr Long ...

View More

Leading Supplier of Industrial Door Components

Gears, Pinions, Platewheels and Sprockets.

NVM offer a comprehensive range of gears, barrel gears, worm gears, compound gears, idler gears, platewheels and pinions. Gears are available in cast, steel or plastic to suit a wide range of applications and can be supplied with a plain bore, oilite bush, bearing or ball race or with keyways.

Whilst NVM carry an extensive range of gears, platewheels and pinions in stock we can also manufacture to customers specific requirements using our in house cnc / gear-cutting department. We also provide a short turn-around emergency service where gears can be manufactured and dispatched within 24 hours.

Castings

NVM are the largest suppliers of roller shutter door castings in the UK, and have in depth experience of servicing the industrial door market. Inner blocks, spring blocks, bearing blocks, spring anchors and support cups are all available from stock and can be supplied in plain bore, bushed or with bearings. Endlocks, Wind Endlocks and combination wind endlocks are available from stock to suit most major lath producers, although any customer specific requirements can be met. Endlocks can be supplied plain or pre-drilled and zinc plated, again all from stock.

Locks & Isolators

Pinlocks and housings are available from stock in either nickel plated steel or aluminium housing. Pinlocks can be supplied either keyed alike or upto groups of 20 different. A full range Isolator and Keyswitch boxes compliment the range and include groundlock isolators, keyswitch isolators, shootbolt isolators and double pin isolators. Cisa Padlocks, armoured padlocks, ground fixing locks and shootbolts are also available from stock. Also available are pressed steel keyswitch locking boxes and locking pad pin sets.

Chain & Chainwheels

NVM stock chainwheels ranging from 4” Ø up to 12” Ø and in a range of materials including cast, aluminium and plastic. Chainwheels can be supplied complete with sprockets or pinions, and either plain bore or bushed. Also available are chainwheel assemblies supplied complete with either fabricated or cast brackets. Chain guides, brackets and chain locking boxes are also available to suit and are stocked in either cast or steel. Standard 5.5mm Chain and drive chain are also available from stock and supplied by the metre. Connection links are also available. To complete the range, Chain Tensioners and Chain Grippers are also available.